Company profile of the Maskinfabrikken REKA A/S
Company description:
The Maskinfabrikken REKA A/S was established in 1979 by people with more
than 30 years of experience in combustion technics. REKA A/S specialises in
producing boilers and fully automatic constructions, all for the
exploitation of most kinds of solid fuels (bio fuels).
The company has 2600 m2 new production, stock and welfare
buildings with very modern production facilities; to this may be added
considerable deliveries from sub-suppliers.
Today REKA produces standard bio fuel boilers and customer fitted
solutions where the customer fitted boilers generally are larger plants.
The current product development has caused that today REKA is among the
leading producers on the market. For the moment REKA develops e.g.
co-generation plants on wood/straw gasification, smoke cleaning systems with
or without condensation of smoke and experiments with Stirling motor in
co-generation plants.
The Maskinfabrikken REKA A/S is an outgoing exporting company which is
active on the following markets: the Baltic States – Russia – Greenland –
Scandinavia – Germany – The Netherlands – Poland – Ghana – and others.
Furthermore REKA produces for the Danish homemarket. These boiler plants are
destributed/installed primarily by local smiths and plumbers.
REKA A/S has the AAA Diplom from 1997, 2000 and 2001 (highest
creditworthy) and the Gazelle Diplom from 1998 (one of the fastest growing
businesses in Denmark).
Assortment:
- Boilers for manual and automatic firing, suitable for most kinds of
solid fuels. The boilers are characterized by long working life, high
efficiency, large firebox, large and accessible doors for firing and
removal of ashes. Sizes 10 kW – 6,5 MW.
- Fully automatic plants developped according to the following
principles:
Screw stokers with combustion retort, produced of grates in
heat-resistant cast iron (the stoker principal), are caracterized by high
safety against return flames and long working life on the combustion
retort. Sizes 70 kW – 2MW.
- Stepped grates, which are very competitive, especially suited for bio
fuels, have almost no fall through, give optimum hot air heating and
combustion air, low dust emission and long working life. Sizes 20 kW – 6,5
MW.
- The silo discharge, which is a large part of our specialty, as we
produce silo discharge with slant screw, chain silo discharge, silo
discharge with horizontal screw and many other kinds of hydraulic silo
discharges in the sizes 5-14 metres. In addition we also have automatic
crane systems.
- Manuel waste refuse disposal plants with or without heat exploitation
(200 – 400 kW).
- Fully automatic waste refuse disposal plants 1 MW - abt. 5 MW.
- Oxygen measuring equipment for the adjustment of the air and fuels
relation in almost all boiler types.
- Storage and expansion tanks.
- Various boiler accessories.
Research and development:
REKA A/S makes and has made many different development projects within
the biomass area. Among others we can mention:
- Cooperation with Danmarks Tekniske Universitet (the Technical
University of Denmark) concerning straw pyrolysis. Co-generation plants on
straw gasification and Stirling plants on green chips.
- With Forskningscenter Bygholm (the Research Center Bygholm) we have
developped an electro filter which can cleanse the smoke for straw as well
as a Venture Scrubber also for cleansing of smoke for straw/chips with
condensation. Both with very fine results.
- At Vest Wood in Logstor, Denmark, we have developped an automatic
chain silo discharge for fast clearing of shaving silos. The chain works
as a chain saw which rotates in the silo. The target, which we wanted to
reach, was to avoid the opening of the doors during the clearing because
of life danger.