REKA boiler, type HKRST-FSK

The professional heating plant with oxygen control.

FUELS:  Containing 30-50% moisture. Fuels which must be scraped out.

 The plant consists of:

REKA threepass-firetube steel plate boiler with an open end, insulated with A-batts and covered with steel and plastisol coated plates.

 Boiler base with built in moving stepped grate. Blower for primary and secondary preheated air and with semi-automatic ash removal. The ashes move automatically up to the front door.

NOTE: Automatic ash removal can be fitted

 Control box (3 x 400 Volt + N + E and with 10A fuses) in splashproof  cabinet containing all necessary contactors, control box with 3 programmes for choice for fuel, overload protector for engine, control keys, timing counter, lambda probe, thermostat etc.

 Stoker type FSK, consisting of: approx. 500 litres fuel container with lid, moving scrapers at the bottom which ensure that stubborn fuel will always be scraped down into the feeding screw.

The stoker in fitted with sprinkler system etc.

The stoker is further available with maximum 500 mm extended feeding screw so that boiler and fuel container can be placed in separate rooms. A 750 litres fuel container is available (approx. 300 mm higher).

The fuel box must always be closed after filling to prevent return-flames. The plant can operate with open as well as closed expansion. On dimensioning the size of the boiler room you must allow for space behind the fuel container for filling up and for space in the front of the boiler for cleaning and removing the ashes.